11
7. If your gate has open rollers, be sure roller guards have been purchased and
installed.
▲
▲
▲
▲
▲
▲
▲
INCORRECT CORRECT
8. Your gate system is required to have a primary and a secondary entrapment safety
system installed and maintained.
9. If your gate closes automatically, loop detectors should be installed to detect the
presence of a vehicle.
10. DO NOT increase force adjustment to compensate for a damaged gate. The gate
should always be maintained to operate manually as easily as possible to provide
maximum protection.
11. Check all safety systems at least once per month for the correct force, speed and
sensitivity. Gate must reverse when hitting a rigid object, or when a non-contact
sensor is activated. If these functions are observed to operate improperly,
discontinue use and have it serviced immediately!
12. You are responsible for ensuring that warning signs are installed and maintained
on both sides of your gate.
13. To ensure safe operation of this equipment, you must read this safety manual and
keep it for reference.
To Next Page
Loading...
