powersoft X4 - Installation Guide; Location, Ventilation, and Cooling

INDEX
19
X4 | SERVICE MANUAL
Understand the connectors on the ADLINK Board for the
Flat Cables. (Fig. 21)
IMPORTANT:
Never mix up the connection.
Wrong connection will cause serious damage
to the Modules.
(Fig. 21)
Connect the CB000522.01 flat cables to the uppermost connectors
and the CB000524.01 flat cables to the lowermost connectors
Connect the CB000523.01 flat cables to the remaining uppermost connectors
Phillips head screws to be removed in order to semparate the DIGI/ADLINK board assembly.
7.12 Replacing the Flat Cable