INDEX
20
X4 | SERVICE MANUAL
When reassembling, arranged the at cables properly
thru the guide slot on the DIGI/ADLINK boards assembly.
(Fig. 22)
(Fig. 22)
When resetting the PSU Flat cables, follow the sequence
portrayed on the right.
Bend the at cable as indicated and connect it to the
micromatch connector portrayed in the picture.
(Fig. 23)
Locate the SD card, push on it in order to release the
locking mechanism. (Fig. 23)
Repeat the same operation with the remaining at cable.
IMPORTANT:
Never mix up the connection.
Wrong connection will cause serious damage
to the Modules.
7.13 SD Card Removal
To Next Page
Loading...
