powersoft X4 - Removing the Power Supply

16
X4 | SERVICE MANUAL
(Fig. 14)
(Fig. 15)
(Fig. 16)
Remove the EMI Filter.
Unscrew the 4 Phillips Head Screws highlighted on (Fig.
14).
Unplug the Fan’s cables and the Flat cables.
By means of an M7 Socketed Screwdriver, remove the
nut holding the Power Supply in place. (Fig. 15)
Gently lift and remove the Power Supply from its original
position, avoiding any damage to the connectors
portrayed on (Fig. 16).
7.8 Removing the Power Supply
INDEX