powersoft X4 - Page 9

INDEX
9
X4 | SERVICE MANUAL
Solid WHITE Ring LED - CHANNEL: Input signal detected
3
Solid ORANGE Centre Channel LED: Muted Channel
4
Solid RED Ring LED: Input signal Clipping (over 26 dBu).
Solid WHITE Ring LED: Input signal detected (up to 25 dBu).
Dimmed Solid WHITE Ring LED: Input signal detected (from -57 dBu).
Ring LED OFF: Input signal off (-60 dBu).
FAULT CONDITIONS LED CONFIGURATIONS
Solid ON White LED: Amp is connected to Armonía
6
Pulsing WHITE LED: WiFi Network ON or USB port in use
Solid ON White LED: WiFi Network ON and USB port in use
5
Pulsing RED Centre LED + Channel status Ring LED: Channel protection Enabled
7
Possible Causes:
• Out of range Rail Voltage
• AD converter in fault
• Out of range Aux Voltage
• DA converter in fault
• Short circuit protection ON
• Out of range Aux Current
• AES3 reception in faulty