25
Bluetooth Configuration in Windows
Make sure the Bluetooth module is turned on (and not in
Airplane Mode) before configuration begins.
1. Click the Settings item in the Start Menu and then click
Devices.
2. Click Bluetooth.
3. Click Add Bluetooth or other devices.
4. Make sure that Bluetooth is turned on and a list of discovered
devices will appear.
5. Double-click the device you want to pair with the computer and
click Pair.
6. On first connection the computer will provide you with a pairing
code to be entered onto the device.
7. Enter the code into your Bluetooth enabled device and click Yes
on the computer to complete the pairing.
8. Select a device and click Remove Device to disconnect from
any device.
1710.book Page 25 Monday, August 7, 2017 2:45 PM
To Next Page
Loading...