PowerTech MP3741 User Manual

Page 15
Browse interface
NOTE:
1） When no operation, the interface will be automatic cycle, but the follow two
interfaces not be displayed.
2） Accumulative power zero clearing: Under PV power interface, press
ENTER button and hold for 5s until the value starts to flash, release,
then briefly press ENTER button again to clear the value.
3） Setting temperature unit: Under battery temperature interface, press
ENTER button and hold for 5s to switch.

PowerTech MP3741 Specifications

General

Brand	PowerTech
Model	MP3741
Category	Controller
Language	English