Powertronix spa reserves the right to modify this document without notice
Page 5 of 46
R&D – USER MANUAL DT0430-E04
1.2 CONFIGURATION AND OPTIONAL EQUIPMENT
1.2.1. BASE CONFIGURATION
The UPS is available in the following configurations:
Input Output Power Mizar / Alcor
Three-phase Input Three-phase Output 10÷15 kVA / 20÷40 kVA
Three-phase Input Single-phase Output 10÷15 kVA / 20÷40 kVA
Single-phase Input Single-phase Output 10÷15 kVA / 20÷40 kVA
1.2.2. BATTERY CABINET
When the autonomy time provided with the basic configuration is not sufficient, additional optional battery
cabinet can be connected to the UPS.
The batteries cabinet can contain up to 2 battery blocks of 4.5 – 5 – 7.2 – 9 Ah.
1.2.3. TRANSFORMER CABINET
If a galvanic isolating transformer is required, it can be positioned inside UPS cabinet in the place of the
internal batteries - in this case an external battery cabinet is essential.
The standard transformer is three-phase/three-phase (or single-phase/single-phase or three-phase/single-
phase) with 1:1 ratio, but it can be supplied with a different transformation ratio upon customer request.
To Next Page
Loading...
