PPC ID-2000 Series - How to Replace TPH and Consumables

33
3. Instructions on Maintenance
3.3 How to Clean the Printer
1
Turn the power off and remove card and ribbon cartridge.
2
Turn the power on with pressing "Eject" button at the same time. When front LED panel
flashes, insert the cleaning card wet with alcohol cleanser into the front card slot.
3
After completing cleaning, cleaning card is ejected automatically. And the cleaning card is
reusable.
4
Leave the printer for 2 ˜ 3 minutes until alcohol cleanser evaporates.
Cleaning Card
Dirt or embedded contamination on roller may cause problem.
Follow the recommended maintenance procedures below.
1
Remove the cleaning roller from the printer.
2
Wet and clean the cleaning roller in flowing water.
3
When the cleaning roller gets dry, insert it into the printer.
Cleaning Roller
For cleaning roller maintenance, follow the procedures below.