EasyManuals Logo

PR electronics 4510 User Manual

Default Icon
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
4510V100-UK 3
Safety instructions
Receipt and unpacking
Unpack the device without damaging it and check whether the device type corresponds to the one ordered. The packing
should always follow the device until this has been permanently mounted.
Environment
Avoid direct sunlight, dust, high temperatures, mechanical vibrations and shock, as well as rain and heavy moisture. If
necessary, heating in excess of the stated limits for ambient temperatures should be avoided by way of ventilation.
The device must be installed in pollution degree 2 or better.
The device is designed to be safe at least under an altitude up to 2 000 m.
The device is designed for indoor use.
If the equipment is installed within an ultimate enclosure, the inner service temperature of the enclosure corresponds to the
ambient temperature of the device.
If the device is operated in an ambient temperature between +55ºC and +60ºC, the temperature of the device housing may be
higher than +60ºC. The device must therefore be installed so that it is only accessible to service personnel or users that are
aware of the reason for restricted access and the required safety measures at an ambient temperature of +55ºC to +6C.
Mounting
Only qualified technicians who are familiar with the technical terms, warnings, and instructions in this installation guide and
who are able to follow these should connect the device. Only devices which are undamaged and free of moist and dust may be
installed. The device may be installed and supplied by PR 4590 ConfigMate and PR 4000 / 9000 series devices only.
Should there be any doubt as to the correct handling of the device, please contact your local distributor or, alternatively,
PR electronics A/S
www.prelectronics.com
Cleaning
When disconnected, the device may be cleaned with a cloth moistened with distilled water.
Warranty
PR electronics A/S offers a 5-year warranty on this product.
Liability
To the extent the instructions in this manual are not strictly observed, the customer cannot advance a demand against PR
electronics A/S that would otherwise exist according to the concluded sales agreement.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PR electronics 4510 and is the answer not in the manual?

PR electronics 4510 Specifications

General IconGeneral
BrandPR electronics
Model4510
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals