4510V100-UK 5
Display / programming front
4510
• Programming display for all past and present 4000 / 9000 series devices, 3000
series devices where applicable, and all versions of ConfigMate 4950
• Monitor process value and status from the built-in display
• Scrolling help text in 7 languages
Applications
• Communications interface for programming and modification of operational parameters.
• The easily readable 4510 display can be used to monitor the process signal, simulate the output signal, indicate sensor
errors and internal device errors.
• The 4510 can be moved from one device to another. The individual system 3000 / 4000 / 9000 device configuration of a
transmitter can be saved and downloaded to subsequent transmitters.
Technical characteristics
• Easy-to-read dot matrix LCD display.
• Backup memory for loading and saving of device configuration.
• Programming access can be blocked by assigning a password. The password is saved in the device in order to ensure a high
degree of protection against unauthorized modifications to the configuration.
Mounting / installation / programming
• Mounting in Zone 2 / Div 2.
• All configuration data from a PR 3000 / 4000 / 9000 device can be transferred to a PC using the PR 4590.
• When mounted on devices that are installed upside down, a menu item allows the display on the 4510 to be rotated 180°
and the up/down buttons to switch function.
• The PR 4510 is approved and certified as an add-on component for the PR 3000, 4000 and 9000 series of devices. All
technical characteristics are valid with the PR 4510 attached.
To Next Page
Loading...
Need help?
General
