.1 Catalyc Converter Cleaning Guide
a) To have access to catalyc converter, remove the stone, the grid and removable
lower tray from the oven.
b) Then, remove the catalyc converter with an upward movement, as in the
image.
c) Inspect the converter, shake to remove any loose parcles and rinse with water. If
necessary, to remove stubborn debris, apply Praca Oven Cleaner, allow to set for
10 minutes, then rinse with water.
d) Before returning the converter to the oven, remove any excess water. If
necessary, shake or tap on a hard surface to confirm.
8.7
.2 Air Filter Cleaning Guide
a) Access the Cavity Air Filter from under the oven door
b) Pull the filter forward to remove from the mounng brackets
c) Inspect and clean if necessary, with neutral detergents and water
d) Rinse well with clean water and remove any excess water. If necessary, shake or
tap on a hard surface to confirm.
e) Reinstall the filter by placing into the mounng brackets and pushing back under
the oven.
8.7
INSTALLATION AND OPERATION MANUAL
41