ALERTS AND ERRORS TABLE9.3
INSTALLATION AND OPERATION MANUAL
You can call our technical assistance to provide feedback, offer suggesons,
or get assistance troubleshoong during normal business hours at:
+1.214.584.6269.
43
Inverter
more than ten
reset aempts
Chamber Sensor and IR
only
one inacve
Panel temperature
from 65 °C to 80 °C
exceeding 80 °C
for 10 minutes
Component Becomes Alert when:
Becomes Error when:
both inacve
Can Network
Communicaon
CLMG
Low Magnetron Current
-
-
fieen seconds without
reaching the current
cables disconnected
or faulty
-