PLEASE NOTE:
Make sure you check the battery level is at least half-full before doing the time zone Setting. If the
battery level is not half-full, charge up the watch until it reaches this level.
Daylight Saving Time On/O (for travelling purposes)
The daylight saving time of your watch is preset to on. In summer when you travel to a country where
there is no daylight saving time then you need to switch o the daylight saving time from the watch so
that the time of the watch will match with the local time after you have adjusted the right time zone.
1. Hold S2 (bottom right button) for 3 seconds while the watch is in normal time keeping mode until
the LCD displays a City name (3 digits City code)
2. Keep pressing S2 until the LCD displays a ashing “DST”
3. Press S1 to change the status of the daylight saving time.
4. Press S2 to conrm or the watch will conrm itself after one minute
5. If the daylight saving time status is changed, the watch will show you “WAIT” and spins to match
the time.
USA DST On/O
Some USA states do not use daylight saving time and you can turn o the USA daylight saving time as
below. This menu opens for setting only when the time zone is within -5 to -8.
1. Hold S2 (bottom right button) for 3 seconds while the watch is in normal time keeping mode until
the LCD displays a city name (3 digits city code)
2. Keep pressing S2 until the LCD displays a ashing “DST-U”
3. Press S1 to change the status of the USA daylight saving time. On means that the USA daylight
saving time is turned on and o means that the USA daylight saving time is turned o.
4. Press S2 to conrm or the watch will conrm itself after one minute.
English / German language selection:
You can select English or German language for the day on the LCD display.
• Hold S2 (bottom right button) for 3 seconds while the watch is in normal time keeping mode until
the LCD displays a city name (3 digits city code).
• Keep pressing S2 until the LCD shows a blinking day (example TUE).
9
To Next Page
Loading...
Need help?
General
