EasyManuals Logo

Precision ANA-DIGI SERIES User Manual

Precision ANA-DIGI SERIES
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
1. Hold S2 (bottom right button) and do not release
2. Then hold S1. Now you are holding 2 buttons at the same time
3. Hold these buttons until the second hand spins to a new position
4. Then judge 1
If the second hand stops at a position between 12:00-6:00:
Press S1 once after another to set the second hand to point at 6 o’clock.
Then press S2 to conrm.
Wait until the watch resumes normal running.
If the second hand stops at a position between 6:00-12:00
Press S2 once
Wait until the watch resumes normal running.
Repeat step 1 to 4
If the second hand stops exactly at 6 o’clock
Press S2 once
Wait until the watch resumes normal running.
Changing the Battery
Your watch uses a high quality ML2016 rechargeable battery which can work for up to 20 years with the
correct usage. When you need to replace a new battery, please nd a trained jeweller or watch specialist
to replace the battery to avoid any damage to the watch.
The specialist will open the watch at the back. Carefully removing the bottom, making sure not to lose
the waterproof seal.
Pick up the battery spring carefully.
Take out the battery and insert a new one (watch the polarity!”+”up).
Then push the battery spring down.
Before you put the case-back on again, make sure the waterproof seal is correctly in place.
14

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Precision ANA-DIGI SERIES and is the answer not in the manual?

Precision ANA-DIGI SERIES Specifications

General IconGeneral
BrandPrecision
ModelANA-DIGI SERIES
CategoryWatch
LanguageEnglish

Related product manuals