EasyManua.ls Logo

Precision ANA-DIGI SERIES - SOLAR POWER RECHARGING; Notes on Recharging; How it works

Precision ANA-DIGI SERIES
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SOLAR POWER RECHARGING
Your Precision watch is charged by all
ambient light, whether that is from a natural or ar-
ticial power source. Avoid overheating as it will
damage the watch permanently.
When the watch is fully charged, it can run for
around 12 months on a single charge.
Notes on Recharging
Avoid recharging at high temperatures (over
60°C) such as placing it on a dashboard of a
vehicle or too close to an electric lamp.
It is recommended that the watch should be
charged up once a month in direct sun light or
under strong uorescent lamp.
The watch may need several days to charge
up (depending on the environment) from a
complete stop if the battery is low. Wait until
the watch is fully charged to resume operation.
How it works
All light is absorbed through the transparent
watch dial.
A solar cell situated beneath the dial converts
the light into electrical energy to power the
watch. With regular exposure to ambient light
the watch will continue to charge.
The battery stores enough energy to power the
watch, even in the dark.
LIGHT
For articial light, use a ourescent
lamp at a distance of 8cm
LENS
DIAL
SOLAR
PANEL
BATTERY
CASE
5

Related product manuals