BUTTON FUNCTIONS (SEE OPERATION DIAGRAM PAGE 2)
S1
• Press and release S1 once to check if the reception is OK
• Press twice to show the battery level for around 5 seconds
• Press and hold S1 for 3 seconds for Manual Signal Reception
S2
Press to set LCD display to show:
• Day
• Date and Month
• Month and Date
• Hour : Minute
• Second
• Battery level with charging indication if battery level is not full
Press and hold the S2 button to enter the “Main Menu” which sets the following:
• Time Zone
• Language Selection for Day Display (English or German)
• Manual Time Setting Mode
• DST
• DST-U
• CON
• RST – “Reset the Watch”
6
To Next Page
Loading...