PRECITEC CHRocodile CLS0.2 - SODX Command

49
5.2.8 SODX Command
Short description:
Select Output Data (extended)
SODX directly selects the data words that will be included in the output telegram by specifying their indices.
For example SODX 83, 16640, 16641 will output the sample counter, the distance and the intensity.
Command syntax:
$SODX [A0] [A1]…[AN]
[Ax] is optional parameters
Signal ID's scheme
Bit:
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Global
Exposure
Information
0 0 0 0 0 0 0 0
Global Exposure Signal ID's
Peak Signal 0 1
Statistics=0
0
Measuring
mode
1 0 0 0
Peak
Number
Peak Signal
Offset
Table 5.4: SODX command: Signal Identity’s scheme.