Precor C966 Serivce Manual

C966 Treadmill
Page 9
Procedure 2.3 — Selecting Club Settings
This procedure allows you to change the following club settings:
• Language
• Measurement Units
• Maximum Speed
• Maximum Workout Time
• Maximum Pause Time
• Cool Down Time
• Fitness Test Enable/Disable
• Modify Custom Courses
Procedure
1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2. With the banner scrolling, press keys RESET,5,6,5,1,5,6,5, sequentially. The select
language display will be initiated.
Selecting Language
3. The prompt SELECT LANGUAGE will be displayed. The currently selected language will
then be displayed.
4. Use the
, keys to scroll through the available languages.
5. Press the ENTER key to select the currently displayed language or the STOP key to leave
the original language selected.
Select Measurement Units
6. The prompt SELECT UNITS will be displayed. The currently selected measurement unit will
then be displayed.
7. Use the
, keys to toggle between U.S. STANDARD and METRIC measurements..
8. Press the ENTER key to select the currently displayed measurement unit or the STOP key
to leave the original measurement unit selected.
Select Maximum Speed
9. The prompt SET MAX SPEED will be displayed. The currently selected maximum speed will
then be displayed in either MPH or KPH depending upon the measurement units selected.

Precor C966 Specifications

Power

motor	4.0 hp continuous duty
power at 120 V	120 v @ 50/60Hz 20 Amps
power at 240 V	240v @ 50/60Hz 20 Amps

Performance

speed	0.5 to 16 mph (1 to 26 kph)
incline	- 3% to 15% grade
frame	Powder-coated steel

Weight and Dimensions

length	86 inches (218 cm)
width with handrails	37 inches (93 cm)
width without handrails	34 inches (86 cm)
height	59 inches (150 cm)
weight	375 lbs (170 kg)
shipping weight	470 lbs (213 kg)
running surface	60 inches x 20 inches (153 cm x 51 cm)