Product Owner’s Manual: Safety Features 8
Treadmill: Using the Safety Clip
Instruct users how important it is to use the safety clip while exercising
on the treadmill. Instruct them on how to attach it to their clothing near
their waistline. If any complications occur, a strong tug on the safety
lanyard will stop the running belt.
If the safety switch trips while users are exercising, have them reattach
the safety clip, press SPEED ▲ or QUICKSTART and reenter the
safety code, if necessary.
Note: The treadmill retains users’ workout statistics if they resume
their workout within the limit set for pause mode.
Diagram 3: Attaching the safety clip
Treadmill: Turning the Unit On and Off
To turn the unit On and Off, use the power switch located at the front
of the unit, near the power cord.
Important: When it is not being used, turn the unit Off.
Treadmill: Weight Limit
You should not allow runners over 350 lb. (160 kg) or walkers heavier
than 500 lb. (225 kg) on the treadmill.
Treadmill: Location
It is important to keep the area around the treadmill open and free from
encumbrances such as other equipment. The minimum space
requirement needed for user safety and proper maintenance is three
feet wide by six feet deep (one meter wide by two meters deep),
directly behind the running belt.
Lanyard
Safety clip