Precor C966i Product Owners Manual

Product Owner’s Manual: Club Features 26
User ID Entry with CSAFE Equipment
The unit is fully compatible with CSAFE protocols. When the unit is
connected to a CSAFE master device, the user is prompted to press
ENTER and begin an identification process.
The user ID is displayed as five zeros and indicates the starting point.
Table 6 describes key functions while in CSAFE mode
Table 6. Keys used to access CSAFE compatible equipment.
A message appears on the display and indicates when the user ID is
accepted by the CSAFE master device. Once program selection is
complete, the user can begin exercising.
To review information about CSAFE specifications, visit the web site
at: www.fitlinxx.com/csafe
If you have questions or need technical support, refer to Obtaining
Service.
Keypad Description
Number keypad Use the number keys to enter a user ID. The number
that is pressed appears on the right. As the user
continues, the numbers fill in the display from right to
left. When all five numbers are in place, the user must
press ENTER or OK to submit the user ID.
CLEAR or BACK Erases individual numbers in the user ID from right to
left.
ENTER or OK Submits the user ID.
Note: User ID entry is bypassed when the user enters
five zeros. No workout statistics are recorded.
PAUSE/RESET Resets the display to the banner.

Precor C966i Specifications

Power and Motor

motor power	4.0 hp continuous duty
power requirements 120v	120 v @ 50/60Hz 20 Amps
power requirements 240v	240v @ 50/60Hz 20 Amps

Performance

speed range	0.5 to 16 mph (1 to 26 kph)
incline range	-3% to 15% grade

Weight and Dimensions

length	86 inches (218 cm)
width with handrails	37 inches (93 cm)
width without handrails	34 inches (86 cm)
height	59 inches (150 cm)
weight	375 lbs (170 kg)
shipping weight	470 lbs (213 kg)
running surface	60 inches x 20 inches (153 cm x 51 cm)