Precor C966i Product Owners Manual

Product Owner’s Manual: Club Features 12
Club Features
These next few pages explain how to customize the unit for your club
and view useful product information. All these features remain hidden
to the club patrons and can only be accessed using special key
presses. Read this section if you want to:
• Enable or disable the safety code
• Change the display to a different language
• Change the display to U.S. standard or metric
• Set the maximum workout and pause times
• Set a cool-down time limit
• Set the maximum speed and incline (treadmill)
• Enable or disable hidden programs or remote access (treadmill)
• Change the auto-level setting (EFX)
• Set the resistance range (cycle)
• Customize a program
• View the odometer
• Display the number of hours the unit has been in use
• View the software versions and part numbers
• Display the serial number
• Check the program usage and error logs
Note: Refer to Table 2 to review the club programming prompts
and factory default settings that can be changed through club
programming mode.

Precor C966i Specifications

Power and Motor

motor power	4.0 hp continuous duty
power requirements 120v	120 v @ 50/60Hz 20 Amps
power requirements 240v	240v @ 50/60Hz 20 Amps

Performance

speed range	0.5 to 16 mph (1 to 26 kph)
incline range	-3% to 15% grade

Weight and Dimensions

length	86 inches (218 cm)
width with handrails	37 inches (93 cm)
width without handrails	34 inches (86 cm)
height	59 inches (150 cm)
weight	375 lbs (170 kg)
shipping weight	470 lbs (213 kg)
running surface	60 inches x 20 inches (153 cm x 51 cm)