Product Owner’s Manual: Maintenance 32
Diagram 8: Wheel lock adjustment
3. Use the ⁵⁄₁₆-inch hex key to turn the wheel lock adjustment key
clockwise ¹⁄₄ turn. Refer to Diagram 8. This process realigns the
center wheel inside the top rail. Leave the ⁵⁄₁₆-inch hex key in place
while you tighten the adjustment screws with the ³⁄₁₆-inch hex key.
4. Remove the hex keys and check that the seat no longer rocks
side-to-side. If the rocking movement continues, you need to
repeat steps 2 and 3.
Long-Term Storage
When the unit is not in use for any length of time. Make sure that the
unit is turned Off (treadmill only) and the power cord or optional power
adapter (self-powered units) is unplugged from its power source and
is positioned so that it will not become damaged or interfere with
people or other equipment.
To Next Page
Loading...
