Product Owner’s Manual: Club Features 19
Treadmill: Setting an Incline Limit
You can set the maximum grade (percent of incline) for the treadmill.
This limits the degree of incline and, consequently, the number of
incline settings that are available to the user. The available range is:
16. At the SET INCLINE LIMIT prompt, press OK. Use the up or
down arrow keys to select the desired grade.
17. When you are ready, press OK to accept the displayed setting and
move to the next program. Or, press PAUSE/RESET to return to
the Precor banner.
Treadmill: Accessing Performance
Programs
Several performance-based programs on the treadmill can be hidden
from the user’s view and, consequently, be unavailable during an
exercise session. These programs are shown in the following list:
Gerkin Fitness Test, USAF PRT, NAVY PRT, ARMY PFT, USMC PFT,
Federal Law Enforcement PEB.
If you keep the default factory setting, the TRACK and 5K programs
are available to the user through the PERFORMANCE key.
If you wish to change this setting, perform the following steps:
18. Press OK to review the current HIDDEN PROGRAMS selection.
Use an arrow key to alternate between the two selections.
19. When you are ready, press OK to accept the displayed setting and
move to the next program. Or, press PAUSE/RESET to return to
the Precor banner.
Treadmill Percent of Incline
C956i 0 to 15% grade
C966i -3 to 15% grade
Setting Description
SHOW
PROGRAMS
Causes all the Performance Programs listed above
to appear. The user can access each program
through the PERFORMANCE key on the display.
HIDE
PROGRAMS
Hides the Performance Programs listed above and
makes them inaccessible to the user. However, the
TRACK and 5K programs remain available and are
accessed when a user presses the
PERFORMANCE key.
To Next Page
Loading...
Need help?
Power and Motor
Performance
Weight and Dimensions
