EasyManuals Logo

Precor C966i Service Manual

Precor C966i
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
C956i, C966i (Gen 06) Treadmill
Page 13
Section Three - Checking Treadmill Operation
This section provides you with a quick method of checking treadmill operation. Check treadmill
operation at the end of a maintenance procedure and when it is necessary to ensure that the
treadmill is operating properly.
Procedure
1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2. Operate the treadmill in the Manual program. Adjust the speed of the running belt to 2–3
m.p.h. Operate the treadmill for at least 5 minutes.
a. Concentrate on the feel of the running belt and the sound of the drive motor and rollers.
Be on the alert for unusual noises, smells, or vibrations.
b. Observe the LED’s on the electronic console. Make sure that each LED lights as the in-
formation corresponding to that LED is displayed on the electronic console.
c. Enter the diagnostics program (see Procedure 2.1) and log the power bits under loaded
and unloaded conditions.
3. Press the STOP key. When the treadmill comes to a stop, view the electronic console as the
treadmill scans time, speed, distance and percent of incline.
4. Press the INCLINE key while viewing the electronic console. Confirm that the running
bed inclines and the incline display increments to 15% as the INCLINE key is pressed.
5. Press the INCLINE key while viewing the electronic console. Confirm that the running bed
returns to a level position and the incline display decrements to 0% as the INCLINE key is
pressed.
6. Turn off the treadmill with the circuit breaker, then unplug the treadmill from the wall outlet.

Other manuals for Precor C966i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Precor C966i and is the answer not in the manual?

Precor C966i Specifications

Power and Motor IconPower and Motor
motor power4.0 hp continuous duty
power requirements 120v120 v @ 50/60Hz 20 Amps
power requirements 240v240v @ 50/60Hz 20 Amps
Performance IconPerformance
speed range0.5 to 16 mph (1 to 26 kph)
incline range-3% to 15% grade
Weight and Dimensions IconWeight and Dimensions
length86 inches (218 cm)
width with handrails37 inches (93 cm)
width without handrails34 inches (86 cm)
height59 inches (150 cm)
weight375 lbs (170 kg)
shipping weight470 lbs (213 kg)
running surface60 inches x 20 inches (153 cm x 51 cm)

Related product manuals