C956i, C966i (Gen 06) Treadmill
Page 5
Procedure 2.1 - Accessing the Diagnostic Software
The treadmill's diagnostic software consists of the following modes:
• Display Test
• Keyboard Test
• Heart Rate Test
• Machine Test
Belt Speed
Incline
Procedure
1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2. Using the RESET key and the numeric keypad, press keys RESET,5,1,7,6,5,7,6,1,
sequentially.
3. Hardware Validation will scroll across the display followed by DISPLAY TEST.
Diagram 2.1 - C956i, C966i Treadmill Display
To Next Page
Loading...
