Precor C966i Service Manual

C956i, C966i (Gen 06) Treadmill
Page 9
Procedure 2.3 - Setting Club Parameters
This procedure allows you to change the following club settings:
• Safety Code
• Select Language
• Select Units
• Set Max Workout Time
• Set Max Pause Time
• Set Cool Down Time
• Set Speed Limit
• Set Incline Limit
• Hidden Programs
• Remote Speed Control
• Set Custom Program 1
• Set Custom Program 2
Procedure
1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2. With the banner scrolling, press keys RESET,5,6,5,1,5,6,5, sequentially.
3. Use the , keys to move to the desired display shown in the list above.
4. DIAGS-SET CLUB PARAMETERS will scroll across the display.
5. SAFETY CODE display. The safety code, when enabled, makes the user enter a password
in order to start the treadmill. Press the OK key.
6. Use the , keys to toggle between ENABLED and DISABLED.
7. Press the BACK key to exit the safety code display.
8. SELECT LANGUAGE display. Press the OK key.
9. Use the , keys to toggle between the available languages.
10. Press the BACK key to exit the select language display.
11. SELECT UNITS display. Press the OK key.
12. Use the , keys to toggle between U.S (miles per hour) and METRIC (kilometers per
hour).
13. Press the BACK key to exit the set units display.

Precor C966i Specifications

Power and Motor

motor power	4.0 hp continuous duty
power requirements 120v	120 v @ 50/60Hz 20 Amps
power requirements 240v	240v @ 50/60Hz 20 Amps

Performance

speed range	0.5 to 16 mph (1 to 26 kph)
incline range	-3% to 15% grade

Weight and Dimensions

length	86 inches (218 cm)
width with handrails	37 inches (93 cm)
width without handrails	34 inches (86 cm)
height	59 inches (150 cm)
weight	375 lbs (170 kg)
shipping weight	470 lbs (213 kg)
running surface	60 inches x 20 inches (153 cm x 51 cm)