Precor C966i Service Manual

C956i, C966i (Gen 06) Treadmill
Page 1-20 Page 20
21. If the display face has been replaced and the same key is still not functioning, replace the
upper PCA.
22. If you have performed steps 18 - 22 and the same key is still not functioning, contact Precor
customer support for assistance.
23. Remove the keypad cable from the upper PCA. See Diagram 5.1.
24. Set the treadmill’s on/off switch in the “on” position.
25. If the STUCK KEY message is no longer displayed, replace the display face.
26. If the STUCK KEY is still being displayed with the keyboard cable disconnected, replace the
upper PCA.
27. If you have performed steps 23 - 26 and the STUCK KEY message is still being displayed,
contact Precor customer support for assistance.

Precor C966i Specifications

Power and Motor

motor power	4.0 hp continuous duty
power requirements 120v	120 v @ 50/60Hz 20 Amps
power requirements 240v	240v @ 50/60Hz 20 Amps

Performance

speed range	0.5 to 16 mph (1 to 26 kph)
incline range	-3% to 15% grade

Weight and Dimensions

length	86 inches (218 cm)
width with handrails	37 inches (93 cm)
width without handrails	34 inches (86 cm)
height	59 inches (150 cm)
weight	375 lbs (170 kg)
shipping weight	470 lbs (213 kg)
running surface	60 inches x 20 inches (153 cm x 51 cm)