5.17i Elliptical Fitness Crosstrainer
Page 5
Procedure 2.1 - Accessing the Diagnostic Program
The EFX 5.17i diagnostic software cycles through the following tests:
• Display Test
• Keyboard Test
• Heart Rate Test
• Lift A/D Test
• Brake (eddy current) Test
Procedure
1. Plug the power cord into the wall outlet, then turn on the EFX 5.17i with the on/off switch.
Note:
For the purpose of entering the key sequences to access the various diagnostic programs, the
keypad keys are hypothetically numbered from 1 to 7 from left to right.
2. With the PRECOR banner displayed, access the diagnostic program by pressing, keys
RESET,5,1,7,6,5,7,6,1, sequentially.
Diagram 2.1 - 5.17i Display
To Next Page
Loading...
