Owner’s Manual: User Identification 21
Updating User Information
To update user information, take the following steps:
1. At the Precor banner, press and hold a USER key. A
welcome greeting scrolls across the display.
Continue holding the USER key until USER [1 or 2]
SETUP appears on the display.
2. The display prompts you to enter a time, weight, and age.
Use the arrow keys to answer each prompt, and then
press ENTER. With each successful entry, you move on
to the next prompt. After you enter the age, the display
indicates that the user setup is complete and resets to
the Precor banner.
To begin an exercise session using your USER key, refer
to Selecting a User Key.
To Next Page
Loading...
Need help?
General
