Owner’s Manual: Workout Options 26
Cooling Down After a Workout
Incorporate a cool-down period into your workout to help
lower your heart rate and minimize muscle stiffness or
soreness.
Note: You cannot switch to a different program or change
display options during the cool-down period.
When you complete a program with a time limit, you
automatically enter a cool-down period. The resistance is
reduced by 20%. To readjust the CrossRamp or
resistance, press the arrow keys. To lower your heart rate,
reduce your strides per minute.
A workout summary appears at the end of the cool-down
period. Refer to Ending a Workout.
Important: If you exit a program before completing it, the
cool-down period is bypassed.
To prematurely end the cool-down period, do the following:
1. Grasp a stationary handrail with one hand.
2. Press RESET to view the workout summary.
3. Press RESET again to return to the Precor banner.
Important: Hold on to a stationary handrail. Step off the
EFX when the lift has stopped moving.
To Next Page
Loading...
Need help?
General
