Diagram 7.2 - Rear Cover assembly with the Access Panel Removed
6. Remove the two screws that fasten the wedge cover to the frame and remove the wedge
cover. See Diagram 7.3.
Diagram 7.3 - Wedged Cover
7. Remove the cover from the lower PCA. Remove the screws that fasten the lower PCA to the
front cover section. Do not remove any of the wires or cables from the lower PCA. Remove
the two screws that fasten the front cover section to the frame. See Diagram 7.4.
Snap
Mounting Screw
Wedge
Cover
Mounting
Screw
To Next Page
Loading...
