Precor EFX524 User Manual

page 23
COMMERCIAL PRODUCTS DIVISION
REMOVING THE LOCKING PIN
CAUTION: Do not allow children on the EFX. Be aware that injuries can
occur from the roller arm. Always use the locking pin to secure the roller
arm when the EFX is not in use.
The locking pin secures the roller arm and keeps it from traveling up or down the
ramp. Pull firmly on the pin to slide it out of the ramp. A lanyard is attached to the
locking pin and ramp. Refer to Diagram 22.
Store the locking pin underneath the ramp once it is removed from the roller arm.
See inset in Diagram 22.
SUPPLYING POWER TO THE EFX524
The EFX does not require an electrical power connection. It has an internal battery
that is recharged every time a user works out for a reasonable period of time. A
pedaling speed above 40 strides per minute must be maintained for several seconds
before the Precor banner appears on the display. Once the banner appears, the user
can press Quick Start or Enter to begin working out. For more information, refer to
page 36, Exercising on the EFX .
Diagram 22 EFX Locking pin.
Locking pin
Storage location

Precor EFX524 Specifications

Power

power	Self-powered
battery recharger	separate purchase option

Electronic Specifications

incline	1 to 20 degrees
resistance levels	1 through 20
display readouts	Calories, Heart Rate, Smart Rate

Weight and Dimensions

length	79 inches (201 cm)
width	32 inches (81 cm)
height	63 inches (160 cm)
weight	183 lbs. (82 kg)