page 17
COMMERCIAL PRODUCTS DIVISION
CAUTION: Since the EFX544 has two different models (120v and 240v
units), check the label near the unit’s power outlet to determine the
voltage requirements. Use an appropriate power cord. Do not remove
or otherwise bypass the 3-prong plug with an adapter in order to use
a non-grounded outlet. Do not plug the EFX544 into a power trans-
former in an attempt to adjust the voltage requirements. Failure to
follow these instruction’s might damage the unit and void Precor’s
limited warranty.
15. Insert the power plug’s connector into the receptacle on the front of the base
assembly.
16. Plug the EFX544 into a grounded outlet. Be sure to use the appropriate
voltage requirements. Refer to
Installation Requirements
on page 1.
You have completed assembling the EFX544. To become familiar with using the
EFX544, please continue on to the following section.
To Next Page
Loading...
