page 16
COMMERCIAL PRODUCTS DIVISION
Diagram 8
Electronic console (back plate)
Ribbon cable connector
Attach the ribbon cable to the
electronic console.
12. Attach the ribbon cable to electronic console as shown in Diagram 8.
Important: The connector is designed to engage in one direction only. Do not
force the connection. Make sure that the flanges on the receptacle snap into
place over the tabs on the connector.
13. Position the electronic console over the mounting plate on the upper column
support. Insert the bolts (D) and tighten securely using the hex key (E). See
Diagram 9.
CAUTION: A fully-assembled EFX544 is very heavy. To avoid possible
injury, Precor recommends that more than one person move the
EFX544 to its final location.
14. If you need to move the EFX544, ask for assistance. The EFX544 weighs
over 300 pounds (135 kilograms). A hand cart may also be useful to help
move the unit.
Secure the electronic console.
Diagram 9
Upper handrail
Electronic console
Electronic console mounting plate
Bolt
Reading Rack
To Next Page
Loading...
