page 18
COMMERCIAL PRODUCTS DIVISION
The EFX544 is designed so users can work out with minimal instruction or
training. The directions on the console and the prompts on the display will guide
a user through the entire workout session. Before the EFX544 is used, however,
we recommend that you familiarize yourself with it so you can instruct your
customers to use it safely and effectively. This section covers the following
information:
• instructions for turning the EFX544 ON and OFF
• an overview of the features provided on the electronic console
• instructions for exercising on the EFX544
• an explanation about using Manual mode and the QUICK START key
• instructions for using the club customization program
TURNING THE EFX544 ON AND OFF
Use the ON/OFF (I/O) power switch to turn the EFX544 ON and OFF. This switch
is located at the front of the unit, near the power cable.
Use the ON/OFF (I/O) power switch to turn OFF the EFX544. Unplug the unit
from the outlet when it is not in use.
UNDERSTANDING THE ELECTRONIC CONSOLE
Once the EFX544 is set up, it is ready to use. There are no complex instructions
to follow or mandatory programming steps required to operate the EFX544.
Choose either the
QUICK START
feature which lets you immediately start the
manual program, or press the ENTER key which causes the display to prompt
you for more specific information. The easy-to-understand prompts let you
specify how long you want to work out. Select one of the programs and then
adapt the ramp and resistance to meet your fitness goals.
The EFX544 incorporates the latest in cardio-fitness by displaying your heart
rate when you wear the Precor Heart Rate Option. This allows you to regulate
your heart rate and maintain the best cardiorespiratory fitness level. To find out
where you can purchase this option, call your local Precor Commercial Products
Service Representative at 1-800-4-PRECOR.
As you exercise, the electronic console provides motivation and presents
constant feedback about your progress. An explanation of each feature on the
EFX544 console follows Diagram 10 on page 11.
The electronic console keypad provides ENTER, RAMP CONTROL, STOP
(HOLD TO RESET), RESISTANCE CONTROL, QUICK START, and CHANGE
keys which affect the function of the EFX544.
Programmable Options on the EFX544
To Next Page
Loading...
