6. Remove the left and right tension adjustment bolts and washers. Retain part(s) and/or
fastener(s) for installation.
7. Lift the take-up roller and remove from the inside of the running belt The roller is
heavy, so be careful to not scratch the deck surface or belt while removing the roller..
CAUTION: Make sure the Take-up roller does not drag across the deck surface
while removing causing damage to the deck surface.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 146
6 Replacement Procedures
Take-up Roller Replacement
To Next Page
Loading...
Need help?
General