Touchscreen consoles (P62, P80, and P82)
Touchscreen consoles use an AC/DC
1
power adapter to supply the console input power.
l Self-power machines: the AC/DC adapter input power cord is plugged into the facility
wall outlet. Up to ten consoles can be connected to the same 20 amp individual
branch circuit. Only touchscreen consoles can share the same individual branch cir-
cuit, no other devices can be connected to this circuit.
l Powered machines: the AC/DC adapter is powered by the machines internal power
supply which is hardwired to the machine input power circuit.
AC/DC adapter specification:
AC/DC Adaptor Specification
input voltage 100v-240v
output power rating 60W/12Vdc/5A
PVS Display
PVS displays use an AC/DC power adapter to power the display.
l On treadmills, the PVS display can be plugged into the same individual branch circuit
outlet as the treadmill.
l On self-powered equipment, up to 10 PVS displays can be connected to the same
20A branch circuit. No other devices except PVS displays can be connected to this cir-
cuit.
PVS display specification:
PVS Display Specification
input power 43 W max
AC/DC adapter specification:
AC/DC Adaptor Specification
input voltage 100v-240v
output power rating 60W/12Vdc/5A
1
Direct Current: electrical current that only flows in one direction.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 19
2 General Information
Console & PVS Display Power Requirements
To Next Page
Loading...
Need help?
General