Precor Experience TRM700-18 User Manual

4. Remove the Drive Motor static bleed resistor frame chassis ground wire (Orange
wire). Use a 5/16" socket (or nut driver) to remove the green ground screw and two
tooth lock washers. (missing or bad snippet)
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 161
6 Replacement Procedures
Drive Motor Replacement

Precor Experience TRM700-18 Specifications

General

Brand	Precor
Model	Experience TRM700-18
Category	Treadmill
Language	English