COMM Data Cable
Active Status Light (ASL)
The Active Status Light is similar to treadmill ASL except that operation has been changed
for self-powered machines. A separate microprocessor and software on the LPCA control
the color and flashing of the LED. A button near the light is used to wake up the entire sys-
tem temporarily to check its color, and to clear the status color if pressed long enough. Act-
ive Status Light processor receives simple commands from the Console, see " Active Status
Light (ASL)" on page236.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 285
9 Theory of Operation
Active Status Light (ASL)
To Next Page
Loading...
