Steps
1. Make sure the console is set to the Welcome banner.
2. Press and hold the VOL down hardkey while pressing CH up > Pause > Pause >
CH up:
3. Touch the designated display positions and follow prompts to complete the touch-
screen calibration.
Debug Information Report shortcut
Console shortcut to download an event log debug information report.
Steps
1. Make sure the console is set to the Welcome banner.
2. Insert a USB
1
flash drive into the Chin USB port.
3. Press and hold the VOL up hardkey while pressing CH up > CH down > CH down >
CH up:
4. Wait for the download to finish and then remove the USB drive.
1
Short for Universal Serial Bus, is an industry standard developed in the mid-1990s that
defines the cables, connectors and communications protocols used in a bus for connection,
communication, and power supply between computers and electronic devices.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 33
4 Standard Service Menus
How to Access the Standard Service Menus
To Next Page
Loading...
Need help?
General