Precor move beyond S3.15 Assembly Instructions

S3.15 Leg Press Option Assembly Instructions
page 8
1 2 3 4 5 6
2. Assemble the Seat Pads and
Handle
A. Thread the T-handle into the Seat Frame and
wrench tighten.
B. Determine which Seat Pad you want to use as the
Back Pad. Attach it to the Seat Bracket Support
using
two 1-inch zinc bolts
two flat zinc washers
Wrench tighten.
C. Lift the T-handle and slide the Back Pad out of
the way to mount the Seat Pad and Handlebar.
D. Attach the Handlebar to the side of the Seat Frame
using
one 4¹⁄₄-inch bolt
two flat washers
one locknut
Wrench tighten.
E. Secure the base of the Handlebar using
one 2¹⁄₂-inch bolt
two flat washers
one locknut
Wrench tighten.
F. Attach the Seat Pad to the Seat Frame using
two 2½-inch bolts
two flat washers
Wrench tighten.
Step 2. Assemble the Seat Pads and Handle
A
1 - 4¹₄" bolt
2 - washers
1- locknut
B
2 - 1" zinc bolts
2 - zinc washers
D
T-handle
1 - 2¹⁄₂" bolt
2 - washers
1- locknut
E
2 - 2½" bolt
2 - washers
F
Back Pad
Seat Bracket Support
Seat Pad
Handlebar
Seat Frame
C
Seat Frame

Precor move beyond S3.15 Specifications

Weight and Dimensions

length	72 inches (182 cm)
height	83 inches (211 cm)
width	51 inches (130 cm)
shipping weight	221 lb (100 kg)