3. Then use a thin wall deep 5/16' socket to hold the locking nut from turning while
loosening the adjustment knob to remove. Keep light pressure on the adjustment
knob while loosening.
Installation instructions
1. Reinstall the handlebar adjustment knob in reverse order.
2. Reinstall the handlebar assembly and verify the handlebar adjustment knob oper-
ation, see "Handlebar Assembly Replacement" on page100.
See Also
"Replacement Procedures" on page41
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 105
5 Replacement Procedures
Handlebar Adjustment Knob Replacement
To Next Page
Loading...
