Precor SPINNER CLIMB - Resistance Knob Replacement; About; Procedure

Resistance Knob Replacement
About
This procedure provides instruction to remove and install the Resistance Knob assembly.
The resistance knob is part of the BrakeRod Assy. Replace the Brake Rod Assy to replace
the Resistance Knob
Procedure
Review entire procedure before starting.
Removal Instructions
1. Expose the Fixed Nut Bushing by turning the Resistance Knob counterclockwise (-)
until the stop is reached.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 129
5 Replacement Procedures
Resistance Knob Replacement