Bike Leveling Adjustment
Use this procedure to level the bike. Make sure the bike is level and sits firmly on the floor
before allowing anyone to use the bike.
IMPORTANT: Place the unit on a flat surface. Rotating the adjustable feet does not
compensate for extremely uneven surfaces.
Leveling the bike
1. Tighten all four leveling feet to fully lower the bike.
2. Push on the bike and try to rock the bike. If there is any movement make foot adjust-
ments as needed to stabilize the bike. Turn the leveling feet clockwise (+) to lower the
bike or counterclockwise (-) to raise the bike.
3. Test ride the bike at slow and high speed verifying that the bike remained stable while
pedaling.
4. Dismount the bike and recheck for stability, readjust the feet as necessary to stabilize
the bike.
See Also
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 39
4 Adjustment Procedures
Bike Leveling Adjustment
To Next Page
Loading...
Need help?
General
