1. Wipe down equipment using a soft lint-free cloth using only the recommended clean-
ing solution. Always spray cleaning solution directly onto the cleaning cloth and not
directly onto the equipment surface to avoid equipment damage due to excessive
moisture.
CAUTION: Do not use acidic cleaners and do not spray directly onto the equipment
surfaces.
2. Rinse surfaces using a clean lint-free cloth dampened with water only.
3. Then completely dry with another clean lint-free cloth.
Equipment Spacing Requirements
The minimum side to side spacing between bikes is 20 in (60 m) and the minimum front to
back spacing is 20 in (60 m).
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 13
2 General Information
Equipment Spacing Requirements
To Next Page
Loading...
Need help?
General
