Precor SPINNER CLIMB User Manual

crank arm using a 15 mm wrench then use an 8 mm hex key to press the pedal out of
the crank arm.
4. Repeat steps to remove the left pedal.
Installation instructions:
5. Insert the right pedal into the right crank arm. Seat the pedal by using a rubber mallet
to lightly tap the center of the pedal into the crank arm.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 123
5 Replacement Procedures
Pedal Replacement

Precor SPINNER CLIMB Specifications

General

Brand	Precor
Model	SPINNER CLIMB
Category	Exercise Bike
Language	English