Precor SPINNER CLIMB User Manual

l
If no measure torque, make sure that the caliper strain gauge cable is connected to
the LPCA strain gauge port and that the cable is not damaged.
l
Replace the LPCA board.
l
Replace the caliper assembly, see "Brake Caliper Assembly Replacement" on
page57
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 161
6 Troubleshooting
System Troubleshooting Procedures

Precor SPINNER CLIMB Specifications

General

Brand	Precor
Model	SPINNER CLIMB
Category	Exercise Bike
Language	English