Precor SPINNER CLIMB User Manual

5. Remove the two 4 mm hex key bolts (2x) and washers (2x) that secure the caliper
assemble to the frame and remove. Hold the caliper assembly while removing to pre-
vent it from falling to the floor causing damage. Retain part(s) and/or fastener(s) for
installation.
Installation
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 63
5 Replacement Procedures
Brake Caliper Assembly Replacement

Precor SPINNER CLIMB Specifications

General

Brand	Precor
Model	SPINNER CLIMB
Category	Exercise Bike
Language	English