Precor SPINNER CLIMB User Manual

(2x). Do not fully tighten the fasteners until after the console has been installed.
4. Position the console on the dash and connect the Data COMM cable. Reinstall the
console backplate and secure using the four 4 mm hex key bolts (4x) (see the
"SPINNER
®
CHRONO™ CONSOLE" Operator's Guide). Make sure the Data
COMMcable is not pinched or stretched too tight.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 82
5 Replacement Procedures
Data COMM Cable Replacement

Precor SPINNER CLIMB Specifications

General

Brand	Precor
Model	SPINNER CLIMB
Category	Exercise Bike
Language	English